Blog

Submarine cable repair takes more than locating a break. Fault measurements must be matched to the installed route, a suitable vessel must reach the s

Selecting a fiber optic cable for a six-axis robot requires more than choosing a bend-insensitive fiber. The complete cable assembly must accommodate

CPO (Co-Packaged Optics) integrates optical engines into the same package assembly as a host switch ASIC. NPO (Near-Packaged Optics) places optical en

A 13,824-fiber optical cable can fit within an outer diameter of less than 40 mm by combining 200 μm coated optical fibers, intermittently bonded f

MPO and MMC are both multi-fiber optical connector systems, but they are not interchangeable connector formats. MPO is an established connector family

Flame-retardant fiber optic cables do not automatically protect the fire resistance of walls and floors they pass through. When communication cables p

Thin-film lithium niobate (TFLN) is emerging as an important platform for next-generation optical modulators, particularly as data center networks mov

Replacing coaxial drop lines with fiber does not always require replacing every pole attachment and support component. Some existing aerial hardware c

Yes, some existing microducts can carry substantially more fibers without being replaced. A 2026 high-density micro fiber optic cable design places 43

Meta's Petal submarine cable is designed to carry 1 petabit per second across the Atlantic using 24 pairs of two-core optical fiber. Those 48 phys

External laser source modules make co-packaged optics easier to cool and service, but they do not settle every reliability question. OIF's Externa

An 800V DC power upgrade does not automatically require new fiber optic cabling. Existing fibers may remain in service if the selected optical links m