BendCom® Bend-resistant single-mode fiber G.657.A1-plus
Product Performance
Low-loss performance and bend-insensitive performance.
The fibers are available in two available diameters: 245μm(standard)/200μm(optional).
Optimized MFD and precise geometrical properties.
Application Scenarios
Gigabit broadband home and FTTP, etc.
Pre-5G network construction, etc.
Data center, computer interconnection.
Product Specification
|
Characteristics |
Conditions |
Units |
Specified values |
|
Optical Characteristics |
|||
|
Attenuation |
1310nm |
dB/km |
≤ 0.350 |
|
1383nm |
dB/km |
≤ 0.350 |
|
|
1550nm |
dB/km |
≤ 0.210 |
|
|
1625nm |
dB/km |
≤ 0.230 |
|
|
Relative Wavelength Attenuation Changes |
1310nm VS. 1285-1330mn |
dB/km |
≤ 0.04 |
|
1550nm VS. 1525-1575mn |
dB/km |
≤ 0.03 |
|
|
Zero Dispersion Wavelength(λ0) |
- |
nm |
1300-1324 |
|
Zero Dispersion Slope |
- |
ps/nm2·km |
≤ 0.092 |
|
PMD |
- |
ps/√km |
≤ 0.2 |
|
Cable Cutoff Wavelength(λcc) |
- |
nm |
≤ 1260 |
|
Mode Field Diameter (MFD) |
1310nm |
μm |
9.2±0.4 |
|
1550mn |
μm |
10.4±0.5 |
|
|
Attenuation discontinuity |
1310nm |
dB |
≤ 0.03 |
|
1550mn |
dB |
≤ 0.05 |
|
|
Geometrical Characteristics |
|||
|
Cladding Diameter |
μm |
125±0.7 |
|
|
Cladding Non-Circularity |
% |
≤ 1.0 |
|
|
Core-Cladding Concentricity Error |
μm |
≤ 0.5 |
|
|
Coating Diameter |
μm |
242±7 |
|
|
200±10 |
|||
|
Coating-Cladding Concentricity Error |
μm |
≤ 12 |
|
|
Curl (Radius) |
m |
≥ 4 |
|
|
Environmental Characteristics 1550nm &1625nm |
|||
|
Temperature Dependence Induced Attenuation |
-60℃ to +85℃ |
dB/km |
≤ 0.05 |
|
Damp Heat Dependence Induced Attenuation |
85℃ and 85% RH, for 30 days |
dB/km |
≤ 0.05 |
|
Watersoak Dependence Induced Attenuation |
23℃, for 30 days |
dB/km |
≤ 0.05 |
|
Dry Heat Induced Attenuation |
85℃, for 30 days |
dB/km |
≤ 0.05 |
|
Mechanical properties |
|||
|
Tension screening |
- |
GPa |
0.69 |
|
- |
kpsi |
100 |
|
|
Coating Strip Force * |
peak force |
N |
1.3-8.9 |
|
typical average force |
N |
1.0-5.0 |
|
|
Tensile Strength |
Weber Probability 50% |
GPa |
≥ 4.00 |
|
Weber Probability 15% |
GPa |
≥ 3.20 |
|
|
Dynamic Fatigue Parameter(nd) |
- |
- |
≥ 20 |
|
Macro-bend Induced Attenuation |
|||
|
Ø30mm×10 |
1550nm |
dB |
≤ 0.25 |
|
1625nm |
dB |
≤ 1.0 |
|
|
Ø20mm×1 |
1550nm |
dB |
≤ 0.75 |
|
1625nm |
dB |
≤ 1.5 |
|
|
*At a coating diameter of 200±10, the coating peel force peaks at 0.6-8.9 N and averages 0.6-5.0 N |
|||
Partner
Hot Tags: g.657.a1-plus, China g.657.a1-plus manufacturers, suppliers, interior optical fibre connector, optical cable parts for indoor, optical fibre termination for indoor, building vertical cable laying fiber optic cables, optical fibre pigtail for indoor use, fiber optic cables for building vertical runs
