G.654.E

Details:

BoneCom® G.654.E Large Active Area Single-Mode Fiber is an optical fiber designed for B100G and 400Gbit/s high-speed communication systems. It has the excellent characteristics of large effective area and ultra-low loss, which reduces the nonlinear effect, significantly increases the allowable optical power of the optical fiber, and greatly expands the transmission span.

Send Inquiry

Download

Description

Technical Parameters

BoneCom® Low-loss and large-active-area single-mode fiber G.654.E

Product Performance

Ultra-low transmission loss, low loss and ultra-low loss are available.

Optimized macro bending loss, Ø60mm*100 turns@1550nm≤ 0.1 dB

Reduce network O&M costs.

Application Scenarios

B100G and 400G high-speed communication systems.

Long-span, high-speed, dense WDM network.

Ultra-long-distance and ultra-large capacity trunk transmission.

Product Specification

Characteristics		Conditions	Units	Specified values
Optical Characteristics
Attenuation	low loss	1550nm	dB/km	≤ 0.170
	low loss	1625nm	dB/km	≤ 0.200
	ultra-low loss	1550nm	dB/km	≤ 0.160
	ultra-low loss	1625nm	dB/km	≤ 0.185
Zero Dispersion Wavelength(λ₀)		-	nm	≤ 1300
Dispersion		1550nm	ps/nm·km	17-23
Dispersion slope		1550nm	ps/nm²·km	0.050-0.070
PMD			ps/√km	≤ 0.2
Cable Cutoff Wavelength(λ㏄)			nm	≤ 1530
1550nm MFD		The effective area is 130 μm²	μm	12.5±0.5
Attenuation discontinuity		1550nm	dB	≤ 0.05
Attenuation of the two-way end difference		1550nm	dB/km	≤ 0.04
Attenuation of the two-way end difference		1625nm	dB/km	≤ 0.04
Geometrical Characteristics
Cladding Diameter			μm	125±1.0
Cladding Non-Circularity			%	≤ 1.0
Core-Cladding Concentricity Error			μm	≤ 0.6
Coating Diameter			μm	245±10
Coating-Cladding Concentricity Error			μm	≤ 12
Curl (Radius)			m	≥ 4
Environmental Characteristics 1550nm &1625nm
Temperature Dependence Induced Attenuation		-60℃ to +85℃	dB/km	≤ 0.05
Damp Heat Dependence Induced Attenuation		85℃ and 85% RH, for 30 days	dB/km	≤ 0.05
Watersoak Dependence Induced Attenuation		23℃, for 30 days	dB/km	≤ 0.05
Dry Heat Induced Attenuation		85℃, for 30 days	dB/km	≤ 0.05
Mechanical properties
Tension screening *		-	GPa	0.69
Tension screening *		-	kpsi	100
Coating Strip Force		peak force	N	1.3-8.9
Coating Strip Force		typical average force	N	1.0-5.0
Tensile Strength		Weber Probability 50%	GPa	≥ 4.00
Tensile Strength		Weber Probability 15%	GPa	≥ 3.20
Dynamic Fatigue Parameter(n_d)		-	-	≥ 20
Macro-bend Induced Attenuation
Ø60mm×100t		1550nm	dB	≤ 0.1
Ø60mm×100t		1625nm	dB	≤ 0.1
*Higher screening tension products are available.

Partner

Hot Tags: g.654.e, China g.654.e manufacturers, suppliers