Description

Technical Parameters

LC to LC Fiber Optic Jumper

LC to LC fiber optic jumpers find widespread applications in data centers, enterprise networks, telecommunications service provider's optical communication networks, and various connections between fiber optic devices. Manufactured and tested to meet ICE, ISO, and ROHS industry standards, HTGD is available in OM1, OM2, OM3, OM4, OM5, OS1 and OS2 fiber types, with LC connectors, and in a variety of cable diameters and materials. The LC(Lucent Connector) connector is widely used due to its small form factor and high-density design. It is suitable for both single-mode and multi-mode fibers and has a push-pull coupling mechanism. LC connectors are suitable for high-density application scenarios such as data centers, enterprise networks and FTTD solutions.

Product Model

Product Model	Product Description
GFJH-1B6,LU-LU,2,Yellow,XM	XM/PCS,LC-LC,G657,LSZH,2.0,Yellow
GJFJBH-2B6,DLU-DLU,2*4.1,Yellow,XM	XM/PCS,LC-LC,G657,LSZH,2*4.1,Yellow
GJFJBH-2A1a.3,DLU-DLU,2*4.1,Aqua,XM	XM/PCS,LC-LC,OM4,LSZH,2*4.1,Aqua
GJFJBH-2A1a.4,DLU-DLU,2*4.1,Aqua,XM	XM/PCS,LC-LC,OM5,LSZH,2*4.1,Aqua

Application:

Communication room, data center

Fiber optic connection transmission equipment, defense preparation

Fiber optic communication system, high-speed and high-capacity fiber transmission system

Fiber optic sensors, active equipment commissioning and testing

Features：

LC fiber connector

UPC and APC type a available

Product length can be customized

Good repeatability and interchange ability

Optical characteristics comply with IEC TIA/EIA and other relevant standards

RoHS 2.0 Compliant

Specifications:

Parameter		Unit	Value
Cable Diameter(optional)		mm	0.90,1.6,2.0,3.0
Cable Jacket Material(optional)		-	PA,PVC,PU,LSZH
Fiber Mode		-	SM:G652,G657		MM:OM1,OM2,OM3,OM4,OM5
Wavelength		nm	1310/1550		850/1300
Endface Polishing		-	UPC	APC	UPC
Insertion Loss(IL)		dB	≤0.30		≤0.25
Return Loss(RL)		dB	≥50	≥60	≥20
Endface Geometric Parameters (3D)	Radius of Curvature	mm	Satisfying IEC TIA/EIA standards
	Apex Offset	μm
	Fiber Spherical Height	nm
	Angular Error	°
Durability		time	1000
Operating Temperature		℃	-20 ~ +80
Storage Temperature		℃	-15 ~ +60

FAQ

Q: When will I receive a quotation?

A: Quotations are normally responded to within 24 hours or less (excluding weekends), but special cases can take a few days.

Q: What is the quality of the connectors?

A: Our factory has been operating in the industry for many years, and we sell our products to many countries around the world. We are fully compliant with ISO9001: 2015 quality management system, which guarantees that our products comply with IEC TIA/EIA standards. We have a range of specialized equipment and manufacturing instruments to ensure reliable product quality.

Q: How do you ensure that the performance of the fiber optic jumpers are reliable?

A: We have a specialized laboratory for high temperature, salt spray and optical performance testing.

Packaging

After all tests are completed, the fiber optic jumpers will be packaged according to the customer's requirements. Usually, we will use PE bag to pack the jumper cables of the small meter section, and then put them into a small carton; to ensure the safety, we will use paper spool to pack the large meter section, and finally both of them will be packed in carton again.

Hot Tags: lc to lc fiber optic jumper, China lc to lc fiber optic jumper manufacturers, suppliers, interior optical fibre pigtail, fiber optic indoor cabling, optical cables for vertical ductwork in buildings, indoor fiber optic termination, optical drop cable for indoor, optical cables for vertical communication lines in buildings

LC To LC Fiber Optic Jumper